Researchers at Stanford University have successfully developed a brand new concept of organic lighting-emitting diodes (OLEDs) with a few nanometers of graphene as transparent conductor. This paves the way for inexpensive mass production of OLEDs on large-area low-cost flexible plastic substrates, which could be rolled up like wallpaper and virtually applied anywhere you want.

Due to its superb image quality, low power consumption and ultra-thin device structure, OLEDs have been developed for more than 20 years, and is recently applied in ultra-thin televisions and other display screens such as those on digital cameras and mobile phones. OLEDs consist of active organic luminescent structure sandwiched between two electrodes, one of which must be transparent. Traditionally, indium tin oxide (ITO) is used in this type of devices. However, indium is rare, expensive and difficult to recycle. Scientists have been actively searching for an alternative candidate.

The next generation of optoelectronic devices requires transparent conductive electrodes to be lightweight, flexible, cheap, environmentally attractive, and compatible with large-scale manufacturing methods. Graphene, a single layer of graphite, is becoming a very promising candidate due to its unique electrical and optical properties. Very recently, Junbo Wu et al., researchers at Stanford University, successfully demonstrated the application of graphene in OLEDs for the first time.

Junbo Wu, the leading researcher of the development, said that they achieved OLEDs on graphene with performance similar to a control device on conventional ITO transparent anodes, which is very exciting and promising for real-world applications. ‘The current report by Wu et al. puts forward a strong case for graphene as a transparent conductor given its competitive performance, even with significantly high sheet resistance.’ said Chongwu Zhou, professor at University of Southern California in the Perspective of ACS Nano, 4(1), 2010.

Graphene has the potential to be a transparent electrode with higher performance, which means it is more transparent and more conductive. It could also be orders of magnitude cheaper than conventional transparent conductors, like ITO. It really has the potential to be both better and cheaper.’ said Prof. Peter Peumans in Podcast Episode 30, ACS Nano January 2010. ‘It (graphene) does have an additional advantage that the electrode is very thin, only a couple of nanometers thick, which potentially gives you much more freedom to design your devices.’ Peter also added.

This research sheds light on the enormous potential of graphene, and opens up an entirely new avenue towards the development of efficient and economical transparent conductors for flexible optoelectronic devices, such as OLEDs and organic photovoltaic cells. Transferring of large-area graphene thin film to a foreign flexible substrate has been previously demonstrated. Combining these technologies together, we have good reasons to expect graphene OLED products on flexible plastic in the near future.

The research is published in the journal ACS Nano, 4(1), 2010, entitled ‘Organic Light-Emitting Diodes on Solution-Processed Graphene Transparent Electrodes’. The authors are Junbo Wu, Mukul Agrawal, Hector A. Becerril, Zhenan Bao, Zunfeng Liu, Yongsheng Chen and Peter Peumans. For detailed information, please refer to

Source: Stanford University

Printed graphene circuits

Nice work by the Fuhrer group on ArXiv. Transfer printing has been used to transfer graphene from the Standard Si/SiO2 substrate to a plastic substrate. In following steps a complete top-gated transistor has been assembled. Link

Application of graphene as an atomic-scale switch for memory devices based on graphene break junctions. Link

Conference in Aizu, Japan, Nov. 17.-19. 2008. Link

Wafer-scale graphene?

Emtsev et. al. present an approach to wafer-scale graphene on SiC in their new manuscript. Mobilities are in the range of ~ 1000 cm2/Vs at room temperature so one will need wait for further results (compare strained Si, etc. …). Yet, a big step towards the industrial use of graphene.

… and carrier collimation in graphene heterojunctions. New manuscript by the Kim group on Arxiv. Interesting work observing quantum conductance oscillations in double-gated graphene devices.

Carbon Wonderland…

Introduction to graphene: Same article either in german (Spektrum der Wissenschaft) or english (Scientific American). The english article is also available for free from Andre Geim’s website.

Echtermeyer et. al. report about the surface functionalization of graphene - which allows them to switch between a metallic and an insulating state. A method to engineer a band-gap in graphene without structuring it into sub-10 nm ribbons? Possible application might be nonvolatile memories.


Graphene LB-films

New publication by the Dai group: “Highly conducting graphene sheets and Langmuir–Blodgett films” Link
Update: Paper also available on Arxiv

Strain in graphene

Yu et. al. deposited graphene on a flexible substrate and introduced strain in graphene by simply bending the substrate. Raman spectroscopy was carried out to investigate the effect of strain. Possible applications might be strain sensors and band-gap engineering in graphene.


« Older entries